Table of Contents
Advertisement
PowerPanel Business Edition Agent installation:
1. Insert the provided CD containing the PowerPanel Business
Edition Agent software into the computer's CD ROM drive.
2. The installation software should load automatically. If not, open the
file manager and select the CD-ROM drive.
3. Launch "software\setup.exe".
4. Follow the instructions to install the software.
You can download the PowerPanel Business Edition Agent software
from the CyberPower Systems web site at www.cyberpowersystems.com,
or contact a CyberPower representative in your area. Once PowerPanel
Business Edition Agent has been installed, the UPS parameters listed
below can be
modified.
Battery Backup Configuration
The PowerPanel Business Edition Agent software provides the
following options for battery backup configuration.
To enable a function, check the box before the item.
To set the options with values, specify them from the drop-down
menu or enter the new values in the blank field.
When all the configurations are set, click the Apply button on the
bottom of the page.
Wake up Battery Backup when utility power restored.
Options: Enabled / Disabled
Default: Enabled
Battery Backup will attempt to restore power from a shorted circuit condition.
Options: Enabled / Disabled
Default: Disabled
Enter bypass mode once Battery Backup is overloaded.
Options: Enabled / Disabled
Default: Enabled
16 Operation
Output
Advertisement
Table of Contents
