Table of Contents
Advertisement
CAUTION: Product Safety
❑
The UPS connection instructions and operation described in the
manual must be followed in the order indicated.
❑ The UPS must be connected to a nearby wall outlet that is easily
accessible. The UPS can be disconnected from the AC power
source by removing the power cord.
❑ Ensure that the electrical specifications on the rating plate for your
AC powered system and the actual electrical consumption of all
the equipment to be connected to the UPS are compatible.
❑ Never install the UPS near liquids or in an excessively damp
environment.
❑ Never allow anything to penetrate the UPS.
❑ Never block the ventilation grates of the UPS.
❑ Never expose the UPS to direct sunlight or a source of heat.
❑ If the UPS must be stored prior to installation, storage must be in a
dry place.
❑
The acceptable storage temperature range is -25ºC to +55ºC.
Special Precautions
❑ At least two people are required to move or install the UPS safely.
❑ Once installed and connected to the AC power source for the first
time, the battery will start to charge. A full charge requires at least
8 hours.
❑ If the UPS is inactive for an extended period, it must be charged
for a period of 24 hours, at least once every 6 months. This avoids
possible damage. During the replacement of the battery module, it
is imperative to use the same type and number of batteries as the
original battery module to maintain an identical level of
performance and safety. In case of doubt, do not hesitate to
contact our sales department or refer to our web site at
www.cyberpowersystems.com.
Safety Instructions v
Advertisement
Table of Contents
