Garmin 300XL Pilot's Manual And Reference page 85

The distance field can be selected to display cumulative ('cum') distance or the dis-
tance for each route leg ('leg'). If cumulative is selected, the first leg' s distance will be
displayed. The second leg will represent the first leg' s distance plus the second leg, and
so on. The time field may be configured to display the estimated time en route (ete),
estimated time of arrival (eta) or desired track (dtk) for each leg.
To change the distance and time fields:
1. With the cursor active, rotate
K
2. Rotate to select the desired setting and press
The active route page may also be used to create a new route or edit the route you
are currently navigating (approach, SID or STAR waypoints cannot be edited), and
provides a fast method of selecting any route waypoint as your next destination way-
point without modifying the active route. If you are editing the active route and want
to save it in its original form, copy it to an open storage route before editing.
To add waypoints to the active route:
C
1. Press twice, if necessary, to activate the cursor.
O
2. Use to highlight the first blank waypoint field,
you would like to add the new waypoint.
K O
3. Use and to enter the new waypoint identifier. Press
E \
4. Press to accept or
waypoint field, and the remaining route waypoints (if any are present) will move down the
list accordingly.
O
to highlight the field you want to change.
C
.
or highlight the waypoint before which
E
.
to cancel. The cursor will automatically move to the next
ROUTE NAV
Adding Active
Route Waypoints
Active route page with cumulative distance (cum)
and desired track (dtk) displayed.
Active route page with leg distance and estimated
time en route displayed.
SECTION
5
75