Garmin 300XL Pilot's Manual And Reference page 24

NAV KEY
SECTION
1
CDI &
Course Select
N
TO
FR
S
OBS
The GNC 300XL's course select feature uses the
external GPS SEQ switch, allowing you to dial in
the desired course to or from your destination
directly from your HSI.
14
To change any of the selectable fields on the CDI page:
Destination
Selected
Course
The GNC 300XL' s course select feature allows the pilot to define the inbound
course to, or outbound course from, the 'active' waypoint, using an external HSI.
GPS SEQ
Once the course select function is activated, the selected course will be displayed
AUTOHOLD
next to the destination waypoint identifier and the CDI will provide guidance relative
to the desired course. The course select feature is only available during route,
approach or direct-to navigation. For more information on the course select feature
and the GPS SEQ switch, see Section 6.
To set a desired inbound course:
C
1. Press twice to activate the cursor in the GPS window.
O
2. Rotate to highlight the field you would like to change.
K
3. Rotate to change the field to display the desired information.
O
4. Rotate to highlight another field, or
1. Dial the desired course on the HSI.
2. Set the external GPS SEQ switch to the HOLD position.
3. To stop the course select function, set the GPS SEQ switch back to the AUTO position.
C
to finish.