Garmin 300XL Pilot's Manual And Reference page 107

The SID select page also allows you to review all the available SIDs for the depar-
ture airport and select, delete or change the active SID.
To replace/delete the active SID:
R O
1. Press and rotate
C
2. Press twice. The active SID (denoted by an asterisk) is highlighted.
3. To replace the active SID with another available SID, rotate
SID. Complete the selection by pressing
4. To delete the active SID, press
removed from the active route.
SIDs can also be selected and deleted from storage routes through the Route
Catalog page.
To select a SID from the route catalog page:
1. Display the desired route on the route catalog page.
2. Select 'sid?' in the route operations field and press
3. Select the desired SID and transitions.
4. The SID waypoints will be inserted into the route and the route review page
will be displayed.
To delete a SID from the route catalog page:
1. Display the desired route on the route catalog page.
2. Select 'sid?' in the route operations field and press
O
3. Rotate to highlight the selected SID (denoted by an asterisk). Press
until the SID select page appears.
O
to highlight the desired
E
.
\ E
, followed by . The SID waypoints will be
E
.
E
.
The SID select page allows you to select a new
SID on the fly.
SIDs may be saved with any stored route.
\ E
, then .
APPROACH NAV SECTION
6
Selecting &
Deleting SIDs
97