Garmin 300XL Pilot's Manual And Reference page 16

TAKEOFF TOUR
CDI & Map Pages
CDI page with 'trk' and 'eta' displayed.
CDI page with 'brg' and 'trk' displayed.
6
In addition to the destination field and graphical CDI, the GNC 300XL CDI page
features four selectable fields for various navigation data so that the page may be con-
figured to your own preferences (see Section 1 for more information). The default set-
tings for the CDI page are:
• Ground Speed (gs)— Your present speed over the ground in knots
• Distance (dis)— The distance to your destination in nautical miles
• Desired Track (dtk)— The course between the 'from' and 'to' waypoints
• Estimated Time En route (ete)— The time to your destination (in hours
and minutes) based upon your present speed and course
The next page available from the N key is the map page. The map page com-
bines the primary navigation information from the CDI page – distance to waypoint,
ground speed, desired track and ETE – with a moving map display. The moving map
display shows your current position (using an airplane symbol or a diamond symbol)
relative to nearby airports, VORs, NDBs, intersections, user waypoints and airspace
boundaries.
The map page can be divided into three main sections:
{
Comm
Frequencies
The communication frequencies are located in the upper left corner of the page,
instead of across the top line as on other pages. The top frequency is the active fre-
quency, with the standby frequency directly below.
Map Display
Data Fields