Garmin 300XL Pilot's Manual And Reference page 108

APPROACH NAV
SECTION
6
Selecting &
Activating STARs
Selecting a STAR.
Selecting a STAR transition.
98
Standard Terminal Arrival Routes (STARs) used in the GNC 300XL are selected
and activated with the same procedures as SIDs. Available STARs may be selected for
the destination airport at any time in the active route as long as the destination air-
port is the last waypoint in the active route or the direct-to waypoint. Activating a
STAR will modify the sequence of waypoints in Route 0. If you'd like to save the con-
tents of Route 0, be sure to copy it to an empty storage route first.
To select and activate a STAR:
R O
1. Press and rotate
C O
2. Press and rotate
E
3. Press . The STAR waypoints will be inserted in the route.
If a STAR has more than one transition or runway, the STAR select page will
display the transitions and/or runway designations available.
To select a transition:
O
1. Rotate until the desired transition is highlighted and press
To select a runway:
O
1. Rotate until the runway designation is highlighted and press
until the STAR select page appears.
until the desired STAR is highlighted.
E
E
.
.