Section 2: Communicating With The Gnc 300Xl - Garmin 300XL Pilot's Manual And Reference

Communicating with the GNC 300XL
The GNC 300XL features a digital VHF radio that provides a seamless transition
from communication to navigation, bringing the two most important functions in fly-
ing together in one panel-mount unit. The GNC 300XL operates in the aviation voice
band, from 118.000 to 136.975 MHz, in 25 kHz steps.
Communication frequencies are selected by activating the cursor in the standby
frequency field and using the inner and outer knobs to dial in the desired frequency.
A frequency may also be quickly selected from the navigation database by simply
highlighting the frequency and pressing the
played in the standby field, it may be made the active frequency by pressing the
key. Note that the active frequency may not by accessed directly. Whenever the cursor is
active in the comm window, the standby frequency will be highlighted.
To access the standby frequency, press C.
This allows you to change the megahertz (number to the left of the decimal) by
rotating O and the kilohertz (number to the right of the decimal) by rotating K. If
you would like to keep the standby field 'hot' (ready for an immediate frequency
change), leave the cursor active in the comm window. To remove the cursor, press
C twice after you have selected the desired frequency.
To make the standby frequency the active frequency, press
The frequencies will be flip-flopped and you'll be able to transmit and receive on
the frequency previously entered as standby. This can be done at any time, regardless
of cursor or GPS status.
Section 2
E
key. Once a desired frequency is dis-
@
.
COMM FEATURES
@
CDI page with cursor inactive.
CDI page with standby field active. To flip-flop the
frequencies, press
SECTION
2
Overview
@
.
33