Table of Contents
Advertisement
GS-SR195V Rack Mount Server
Serial Port B
This allows users to configure serial prot B by using this option.
Disabled
Disable the configuration.
Enabled
Enable the configuration (Default value)
Base I/O Address/IRQ
3F8/IRQ4
Set IO address to 3F8.
2F8/IRQ3
Set IO address to 2F8.
3E8/IRQ4
Set IO address to 3E8.
2E8/IRQ3
Set IO address to 2E8.
Floppy disk controller
Enabled
Disabled
Floppy Check
Enabled
Disabled
Parallel ATA
Disabled
Both
Channel 0
Channel1
(Default value)
Enable the floppy disk controller. (Default value)
Disable the device.
Enable the device to verify floppy typer when system boot.
Disable the this function. (Default value)
Disable the device.
Select both Channel 0 and Channel 1 as Parallel ATA.
(Default value)
Select both Channel 0 as Parallel ATA.
Select both Channel 1 as Parallel ATA.
4 2
Advertisement
Table of Contents
