Coolant - Yamaha Majesty YP400X Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
2
3
1. Final transmission oil filler cap
2. Final transmission oil drain bolt
4
5. Install the final transmission oil
drain bolt, and then tighten it to the
5
specified torque.
6
Tightening torque:
Final transmission oil drain bolt:
20 Nm (2.0 m·kgf, 14.5 ft·lbf)
7
6. Add the specified amount of the
recommended final transmission
8
oil, and then install and tighten the
oil filler cap.
9
Recommended final transmission
oil:
See page 8-1.
Oil quantity:
0.25 L (0.26 US qt) (0.22 Imp.qt)
1
WARNING
G
Make sure that no foreign mate-
rial enters the final transmission
case.
G
Make sure that no oil gets on the
tire or wheel.
7. Check the final transmission case
for oil leakage. If oil is leaking,
check for the cause.
EWA11310

Coolant

The coolant level should be checked
before each ride. In addition, the cool-
ant must be changed at the intervals
specified in the periodic maintenance
and lubrication chart.
To check the coolant level
NOTE:
6-18
1. Place the vehicle on a level sur-
face and hold it in an upright posi-
tion.
G The coolant level must be checked
on a cold engine since the level
varies with engine temperature.
G
Make sure that the vehicle is posi-
tioned straight up when checking
the coolant level. A slight tilt to the
side can result in a false reading.
2. Pull up the right floorboard mat as
shown.
EAU20070
EAU34192