Adjusting The Shock Absorber Assemblies - Yamaha Majesty YP400X Owner's Manual

being washed, wrap any articles
stored in the compartment in a
plastic bag.
G Do not keep anything valuable
or breakable in the storage com-
partment.
CAUTION:
Do not leave the rider seat open for
an extended period of time, other-
wise the light may cause the battery
to discharge.
WARNING
Do not exceed the following loading
limits:
G
Front storage compartment A:
2 kg (4 lb)
G
Rear storage compartment: 5 kg
(11 lb)
G Maximum load for the vehicle:
196 kg (432 lb)
INSTRUMENT AND CONTROL FUNCTIONS
Adjusting the shock absorber
assemblies
2
1
ECA11100
(b)
EWA11170
1. Spring preload adjusting ring
2. Position indicator
3. Spring preload adjusting tool
Each shock absorber assembly is
equipped with a spring preload adjust-
ing ring.
CAUTION:
Never attempt to turn an adjusting
mechanism beyond the maximum or
minimum settings.
WARNING
Always adjust both shock absorber
assemblies equally, otherwise poor
EAU14890 handling and loss of stability may
result.
Adjust the spring preload as follows.
To increase the spring preload and
5
4
thereby harden the suspension, turn
3
2
the adjusting ring on each shock ab-
1
sorber assembly in direction (a). To de-
crease the spring preload and thereby
(a)
soften the suspension, turn the adjust-
ing ring on each shock absorber as-
sembly in direction (b).
3
NOTE:
ECA10100
EWA10210
3-15
G
Align the appropriate notch in the
adjusting ring with the position in-
dicator on the shock absorber.
G
Use the spring preload adjusting
tool included in the owner's tool kit
to make this adjustment.
Spring preload setting:
Minimum (soft):
1
Standard:
2
Maximum (hard):
5
2
3
4
5
6
7
8
9