Yamaha Majesty YP400X Owner's Manual page 61

Table of Contents

Advertisement

1
1. Right floorboard mat
3. Remove the coolant reservoir cov-
er by removing the screw.
2
1
1. Screw
2. Coolant reservoir cover
4. Check the coolant level in the cool-
ant reservoir.
PERIODIC MAINTENANCE AND MINOR REPAIR
NOTE:
The coolant should be between the
minimum and maximum level marks.
5. If the coolant is at or below the
minimum level mark, open the
coolant reservoir cap, add coolant
to the maximum level mark, and
then close the coolant reservoir
cap.
1
1. Minimum level mark
2. Maximum level mark
3. Coolant reservoir cap
Coolant reservoir capacity (up to the
maximum level mark):
0.32 L (0.34 US qt) (0.28 Imp.qt)
6-19
CAUTION:
G
If coolant is not available, use
distilled water or soft tap water
instead. Do not use hard water
or salt water since it is harmful
to the engine.
G
If water has been used instead
of coolant, replace it with cool-
ant as soon as possible, other-
wise the cooling system will not
2
be protected against frost and
corrosion.
3
G
If water has been added to the
coolant, have a Yamaha dealer
check the antifreeze content of
the coolant as soon as possible,
otherwise the effectiveness of
the coolant will be reduced.
WARNING
Never attempt to remove the radiator
cap when the engine is hot.
6. Install the coolant reservoir cover
by installing the screw.
7. Place the right floorboard mat in
the original position.
ECA10471
2
3
4
5
6
7
EWA10380
8
9

Advertisement

Table of Contents
loading

Table of Contents