Sidestand; Ignition Circuit Cut-Off System - Yamaha Majesty YP400X Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Sidestand

The sidestand is located on the left side
of the frame. Raise the sidestand or
lower it with your foot while holding the
1
vehicle upright.
NOTE:
2
The built-in sidestand switch is part of
the ignition circuit cut-off system, which
3
cuts the ignition in certain situations.
(See further down for an explanation of
4
the ignition circuit cut-off system.)
5
WARNING
The vehicle must not be ridden with
the sidestand down, or if the side-
6
stand cannot be properly moved up
(or does not stay up), otherwise the
7
sidestand could contact the ground
and distract the operator, resulting
8
in a possible loss of control.
Yamaha's ignition circuit cut-off
system has been designed to assist
9
the operator in fulfilling the respon-
sibility of raising the sidestand be-
fore starting off. Therefore, check
this system regularly as described
below and have a Yamaha dealer re-
EAU15301 pair it if it does not function proper-
ly.
EWA10240

Ignition circuit cut-off system

The ignition circuit cut-off system (com-
prising the sidestand switch and brake
light switches) has the following func-
tions.
Periodically check the operation of the
ignition circuit cut-off system according
to the following procedure.
If a malfunction is noted, have a
Yamaha dealer check the system be-
fore riding.
3-16
G
It prevents starting when the side-
stand is up, but neither brake is ap-
plied.
G
It prevents starting when either
brake is applied, but the sidestand
is still down.
G It cuts the running engine when the
sidestand is moved down.
WARNING
EAU15372
EWA10250