Setting The Scan Station Clock - Kodak Scan Station 100 PLUS Administrator's Manual

Setting the Scan Station
clock
3-30
The time clock on the Scan Station can only be set when the Scan
Station is in local Administrative mode.
To set the time clock on the Scan Station:
1. Insert a flash drive with an administrative configuration file into the
Scan Station.
2. If prompted to update the Scan Station settings, press the No button
on the control panel. The scanner will now be in Settings mode.
3. Use the arrows to scroll to the Time settings icon.
4. Click on the Set option to display the Time Entry keypad.
5. Enter the time for the Scan Station and click Done.
NOTE: Time is entered in 24-hour mode.
A-61588 July 2008