August 2001
Setting the Scan Area
To set the Scan Area, enter values for:
# Pixels (valid values range from 1 through 6002); for fastest scanning, enter
•
a value of 1000
Pixel Offset (valid values range from 0 through 6001)
•
# Lines (valid values range from 1 through 7464)
•
Line Offset (valid values range from 0 through 7463)
•
•
Pixel Summing (valid values are 1:1, 1:2, and 1:4)
NOTE: If you select Pixel Summing of 1:2 or 1:4, use the Actual #Pixels and
Actual #Lines for viewing the image in the Adobe Photoshop program.
Scanning the Image Data
1. If desired, save the scanned image as a file:
a. Enter the Path information (file destination).
b. Select Write image to file.
2. Click Scan.
Using the Service and Assembly Module (SAM)
A-9