Table of Contents
Advertisement
2 Pre-installation Checklist
It is recommended that you fill out this worksheet before installing the Kodak Scan Station 100. You will
need this information about your network to create an administrative configuration for your Scan Station
using the Configuration Organizer (provided with the Scan Station) and to complete the installation.
Research any information you are unsure of before creating the administrative configuration file. If you
have trouble filling out this worksheet, see the person who manages your network.
NOTE: This installation shows what you will need to install the Scan Station as of the date of this
document. As we improve our products from time to time, check the Kodak website
(http://www.Kodak.com/go/disupport) for the latest version.
Language Settings — found under the Settings button in the Configuration Organizer or
Administration GUI.
Parameter Name
Description/Sample
Language
Name of GUI/OCR language
Device Settings — found under the Settings button in the Configuration Organizer or
Administration GUI
Parameter Name
Description/Sample
Device Name
NETBIOS name of the Scan
Station. The default is the Scan
Station's unique serial number
(e.g., KSSXXXX-XXXX, where
X=the serial number)
IP Address Settings — Automatic
Automatic (DHCP)
This is the default.
IP Address Settings — Static
Static (IPv4)
Standard IPv4 address
(e.g., 192.0.0.1)
• IP Address
Scan Station's IP address
• Subnet Mask
Scan Station's Subnet Mask (e.g.,
255.255.255.0)
• Default Gateway
IP of default gateway on the
network
• Preferred DNS
IP of domain name Server #1
Server
• Alternate DNS
IP of the alternate domain name
Server
Server #2
• Preferred WINS
IP of Windows Internet Name
Server
Server #1
A-61588 July 2008
Your Setting
.
Your Setting
Notes
Default: English.
Notes
It is recommended that you do not
change this setting. Must be unique
(up to 15 characters) on the network/
subnet. You can leave this field
unchanged as "Scan-Station" to
avoid overwriting an existing device
name. See Chapter 5, Scan Station
Administration Specifics for more
information.
If selected, the IP address, subnet
mask, and DNS server of the Scan
Station are set automatically by the
DHCP server.
Complete this and the other
network sections only if you are
not using DHCP.
Only these numbers are allowed: 0,
128, 192, 224, 248, 252, 254 and 255.
If this number is incorrect, you may
not be able to reach some network
locations.
2-1
Advertisement
Table of Contents
