Cleaning The Imaging Guides - Kodak Scan Station 100 PLUS Administrator's Manual

Cleaning the imaging
guides
A-61588 July 2008
1. Remove dust and debris from this area by using a Staticide wipe or
a small brush. Be careful not to scratch the imaging guides when
cleaning.
IMPORTANT: Staticide wipes contain isopropanol which can cause eye
irritation and dry skin. Wash your hands with soap and
water after performing maintenance procedures. Refer to
the MSDS for more information
2. Wipe the upper and lower imaging guides with an almost dry
Staticide wipe to remove any streaks.
6-3