1.
Mark pole sections with tape (not supplied) as shown.
Taped Reference Mark
Bounce middle pole (2) into top pole section
2.
(1) using a wood scrap as shown until top
pole no longer moves toward pole taped
reference mark on middle pole.
NOTE: Pole sections should have a 3-1/2" (9
cm) minimum overlap.
SECTION A: ASSEMBLE THE POLES
WARNING
LABEL
Taped Reference
2
Mark
9
1
Taped Reference Mark
03/04
3
2
1
WOOD SCRAP
(NOT SUPPLIED)
P/N 21447702