Huffy NCS102 Owner's Manual page 21

9.
Support pole on sawhorse. Attach backboard assembly to top pole section (1)
as shown. Install pole cap (25). NOTE: Two people are recommended for this
step. Use caution; elevator assembly is heavy.
10.
Install upper elevator tubes (33) to triangle plates (32) as shown. Install handle
assembly to lower elevator tubes (34) using bolt (50), spacers (20), and nut (21) as
shown.
NOTE: Before going on to next step, set adjustable system assembly to the 10'
(3.05 m) setting.
51
WARNING!
TWO PEOPLE REQUIRED
FOR THIS PROCEDURE.
FAILURE TO FOLLOW THIS
WARNING COULD RESULT
IN SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
1
20
1
32
20
50
21
20
20
50
50
21
21
34
21
25
32
47
34
21
33
20
34
32
34
20
33
03/04 P/N 21447702