Section A: Assemble The Poles - Huffy 21147703 Owner's Manual

SECTION A: ASSEMBLE THE POLES

1.
Correctly identify each pole section.
I.D. Label
Align dimple of top pole with slot of middle pole. While maintaining alignment, bounce middle pole
2.
(2) into top pole section (1) using a wood scrap as shown until top pole no longer moves toward
pole identification mark on middle pole.
CAUTION!
THE IDENTIFICATION STICKER IS
LOCATED 5" FROM THE END OF
THE POLE. WHEN PROPERLY
POUNDED TOGETHER, THE POLE
SECTIONS SHOULD HAVE A 3-1/2"
MINIMUM OVERLAP, LEAVING 1-
1/2" BETWEEN THE OVERLAPPING
POLE AND THE IDENTIFICATION
STICKER.
IDENTIFICATION
STICKER
pole middle
1
IDENTIFICATION
STICKER
pole middle
WARNING
LABEL
2
IDENTIFICATION
5"
2
1-1/2"
1
2
NOTE:
POLE SECTIONS
SHOULD HAVE A
3-1/2" (9 CM) MINIMUM
OVERLAP.
POLE
MARK
9
1
I.D. Label
03/04
3
2
1
WOOD SCRAP
(NOT SUPPLIED)
P/N 21147703