Section G: Apply Height And Moving Label - Huffy NCS102 Owner's Manual

SECTION G: APPLY HEIGHT AND MOVING LABEL

Apply Height Adjustment and Moving Label (42) to front of pole, where it is
1.
clearly visible.
HEIGHT ADJUSTMENT
TO ADJUST BACKBOARD:
1. While holding handle, remove pin.
2. Move elevator up or down to
desired height.
3. Replace pin full length to lock
system at desired height.
MOVING SYSTEM
1
3
4
27
42
2
2
1. Adjust basketball backboard
height to lowest position.
2. While holding pole, rotate
basketball system forward
until wheels engage with
ground.
3. Move basketball system to
desired location.
2
4. Carefully rotate basketball
system upright.
5. Reattach ground restraint and
check system for stability.
201252
03/04
1
3
2/99
P/N 21447702