Examples For Using The Generic Sample Modem Configuration Files; Customizing The Modem Configuration Files - IBM RS/6000 44P Series User Manual

Note: Some modems, such as the IBM 7857-017, are not designed for the paging

Examples for Using the Generic Sample Modem Configuration Files

AT&T DataPort 2001 **
Bocamodem 1440E
Hayes Smart Modem
USRobotics 36.6K
Note: ** Ring interrupt only on first ring.

Customizing the Modem Configuration Files

You can create your own modem configuration files or modify the samples provided.
After you customize your modem configuration files, you must access them through the
Configure Remote Maintenance Policy Service Aid rather than from the service
processor menus.
Notes:
1. If you have already set up your serial ports, line speeds, authorizations and
telephone numbers from the service processor menus, use the service aid to
specify your customized modem configuration files.
2. If you have not already set up your serial ports, line speeds, authorizations, and
telephone numbers from the service processor menus, you can use the service aids
to set them while you specify your customized modem configuration files.
To disable Auto-Reliable Mode testing of the remote modem, use the sample modem
configuration file /usr/share/modems/modem_f.cfg as a model to modify.
1. Find the necessary command in your modem manual.
function. Although they can be used for paging, they return an error message
when they do not get the expected response from another modem. Therefore,
even though the paging was successful, the error message causes the Service
Processor to retry, continuing to place pager calls for the number of retries
specified in the Call-Out Policy Setup Menu. These retries result in redundant
pages.
Modem Setup Z
X
300
IBM 5841 X
IBM 5843 X
IBM 7851
IBM 7852-10
IBM 7855
Sportster
Zoom V.32
Setup Z0 Setup F
(Rare)
X
X
Appendix E. Modem Configurations
Setup F0 Setup F1
X
X
X
X
X
173