Table 1 Sample Configuration Printout (Twinax) - IBM 6400 Operation Manual

configuring MPI

Table 1 Sample Configuration Printout (Twinax)

SW1-2 SW1-1 EMULATION SELECTED
=>> 0 0
0 1
1 0
1 1
SW1-4 SW1-3 DEFAULT CHARACTER SET
=>> 0 0
0 1
1 0
1 1
SW1-6 SW1-5 IGP OPTIONS
=>> 0 0
0 1
1 0
1 1
SW1-7 PRINTER TYPE
=>> 0 6400-PRINTRONIX
1 6400-EPSON
SW1-8 PRINTER EMULATION (6400-PRINTRONIX)
=>> 0 P-SERIES COMPATIBLE
1 SERIAL MATRIX
SW2-1 DEFAULT IGP SFCC
=>> 0 ^ CARET (5Eh,
1 ~ TILDE (7Eh, 126d)
SW2-3 SW2-2 PANEL AND SYSTEM CONTROL
=>> 0 0
0 1
1 0
1 1
SW2-4 MULTIPLEXER TIMEOUT
=>> 0 SHORT (15 SEC)
1 LONG (45 SEC)
If you are replacing an existing Printronix P-
Series printer, SW1-7 and SW1-8 should be
set to the Open (Off) state. This will provide
compatibility with existing jobs. Also, if you
will be port switching, you should set SW1-7
and SW1-8 to be compatible with the
alternate host. See page 12 for more
information. If you set SW1-7 to 6400
Printronix (Open), you must set SW1-8. If
you set SW1-7 to 6400-Epson (Closed), you
do not need to set SW1-8 and you can
leave SW1-8 to the factory default.
* indicates IGP Feature installed.
** indicates Code V Feature installed.
6
4214
5225
5256
4234
MULTINATIONAL
USA
AUSTRIA/GERMANY
FRENCH CANADIAN
NO IGP INSTALLED
IGP-PGL INSTALLED*
IGP-VGL INSTALLED**
RESERVED
94d)
SYSTEM CONTROLS CPI AND PRINT QUALITY
SYSTEM CONTROLS CPI, PANEL CONTROLS PRINT QUALITY
PANEL CONTROLS CPI, SYSTEM CONTROLS PRINT QUALITY
PANEL CONTROLS CPI, PRINT QUALITY, AND LPI
note
note
Multi–Platform Interface Feature Operation Guide