Loading A Compact Disc - IBM RS/6000 44P Series User Manual

Loading a Compact Disc

To load a compact disc into the drive, do the following:
1. Press the Load/Unload button to open the tray. The tray slides out of the drive.
2. Place the compact disc in the tray with the label facing up.
3. Press the Load/Unload button, or gently push in the tray, to close the tray.
Note: Be sure that none of the vertical retaining tabs are extended when you use the
drive in the horizontal position.
17
Chapter 2. Using the 44P Series Model 170