Note: The factory default setting is Activated . Data compression is usually controlled
v A half-high 5.25-inch form-factor.
v An LCD display that provides operating and error messages.
v Status lights that indicate:
– When it is time to clean the tape drive
– When the tape is in motion
– When the drive is ready to accept tape motion commands
Front View of the 8mm Tape Drive
1
2
3
4
5
6
7
by the application software.
Disturbance (amber)
Ready (green)
Activity (green)
Status lights
LCD display
Tape drive door
Unload button
Chapter 2. Using the 44P Series Model 170
19