System Information Menu - IBM RS/6000 44P Series User Manual

The user can also override the choices in the Boot Mode Menu while the system
initialization indicators display on the screen. For example, if the user had enabled
the system to enter the SMS menus (option 1) but pressed the 8 key while the
system initialization indicators displayed on the screen, the system would enter the
Open Firmware prompt and disregards the settings in the Boot Mode Menu.
After the logo displays, the initialization icons display across the bottom of the screen.
v Ring Indicate Power-On Menu
Ring Indicate Power-On is an alternate method of dialing in, without establishing a
service processor session. If the system is powered off and Ring Indicate Power-On
is enabled, the server is powered on at the predetermined number of rings, If the
server is already on, no action is taken. In either case, the telephone call is not
answered. The caller receives no feedback that the server is powered on. The Ring
Indicate Power-On Menu and defaults are shown below:
1. Ring indicate power-on:
2. Number of rings:
98. Return to Previous Menu
The number of rings can be set to any number greater than zero.
v Reboot/Restart Policy Setup Menu, see "Reboot/Restart Policy Setup Menu" on
page 59.
v Power-On System
Allows immediate power-on of the system. For other power-on methods, see "System
Power-On Methods" on page 61.
v Power-Off System
Allows the user to power-off the server following a surveillance failure.

System Information Menu

This menu provides access to system configuration information, error logs, system
resources, and processor configuration.
50
44P Series Model 170 User's Guide
Ring Indicate Power-On Menu
Currently Disabled
Currently 6