Table of Contents
Advertisement
Menu
Thickness
Color
Bright
Area Marker 2
Center Marker
Center Marker
Mode
Color
Bright
H Position
V Position
Copy From
Preset Value
Other Monitor
Monitor ID
Memory Stick
P&P Setting
Side by Side
Line Display
Function and operation ([
With 4:3
80%
Aspect Mode 16:9
Sets the thickness of the area marker 1.
Set to 1 to 5 (dots). [2]
Sets the color of the area marker 1.
You can select from [White] (white), Red (red), Green (green), Blue (blue), Yellow (yellow),
Cyan (cyan) or Magenta (magenta).
Sets the luminance of the area marker 1.
You can select from High (bright) or [Low] (dark).
Sets the area marker 2.
The set items are the same as for Area Marker 1 (page 70).
Sets the center marker.
Sets whether or not to display the center marker ([Off] or On).
Sets the display mode of the center marker.
You can select from [Short] (short) or Long (long).
Sets the color of the center marker.
You can select from [White] (white), Red (red), Green (green), Blue (blue), Yellow (yellow),
Cyan (cyan) or Magenta (magenta).
Sets the luminance of the center marker.
You can select from High (bright) or [Low] (dark).
Sets the horizontal position of the marker.
Set to –65 (leftward) to +65 (rightward). [00]
Sets the vertical position of the marker.
Set to –35 (downward) to +35 (upward). [00]
Copies the other marker preset data.
Note
Use the controller with software version 1.6 or higher to use the Copy From function.
Copies other data in this monitor.
When the item is selected, you can select from Marker1, Marker2, Marker3, Marker4 or
Marker5.
Copies data from another monitor.
Enter the ID number of the source monitor.
When the NETWORK switch is set to PEER TO PEER, this is not selectable.
When the ID number is entered, you can select from Marker1, Marker2, Marker3, Marker4
or Marker5.
Copies data in the "Memory Stick".
When the item is selected, the file names in the source "Memory Stick" are displayed.
When the file is selected, you can select from Marker1, Marker2, Marker3, Marker4 or
Marker5.
Sets the multi display setting.
Sets the side by side display.
Sets display mode of the boundary line.
[Off]: Not displayed.
On: Always displayed.
]: factory setting)
80%
Aspect Mode 4:3
71
Function Setting Menu
Advertisement
Table of Contents
