Table of Contents
Advertisement
Auxiliary Setting Menu
Overview
This menu is used for setting the monitor condition such as the aperture modification and decode mode.
When Auxiliary Setting is selected, the following menu is displayed.
iAuxiliary Setting
B
ASC CDL
B
User LUT
xxx
Native Scan Mode:
xxx
Aperture Value:
xxx
NTSC Comb Filter:
xxx
Filter Switch:
xxx
Peak White Control:
Menu Function and Operation
Menu
ASC CDL
Load ASC CDL
Delete ASC CDL
Function and operation ([
Sets or deletes the ASC CDL data.
Loads ASC CDL data files from a "Memory Stick".
You can select from among ASC CDL 1, ASC CDL 2, ASC CDL 3, ASC CDL 4 and ASC
CDL 5.
If no data file has been loaded to ASC CDL 1 to ASC CDL 5, Internal Memory X is displayed
for the corresponding item. If an ASC CDL data file has been loaded, the file name is
displayed.
To load, select ASC CDL 1 to ASC CDL 5. The message "Load from Memory Stick" and the
list of ASC CDL data files stored in the "Memory Stick" are displayed. Select a file name from
the list.
Notes
• Use the controller with software version 1.7 or higher to load the ASC CDL data files from
the "Memory Stick".
• For details on the format of ASC CDL data files, contact your Sony representative.
Deletes the ASC CDL data files loaded to ASC CDL 1 to ASC CDL 5 of the ASC CDL menu.
When this item is selected, each of ASC CDL 1 to ASC CDL 5 to which an ASC CDL data file
has been loaded is displayed with the loaded file name, as well as All.
Notes
• Delete ASC CDL is disabled when no data file is loaded to ASC CDL 1 to ASC CDL 5 or if
no Internal Memory X data is modified.
• Internal Memory X cannot be selected if its data is not modified.
To delete a specified ASC CDL data file
Select the ASC CDL data you wish to delete.
To delete all ASC CDL data files
Select All.
The following message appears.
Delete this data?
OK: To delete the files, press the ENTER (Ent) button.
Cancel: To cancel, press the MENU button.
]: factory setting)
67
Auxiliary Setting Menu
Advertisement
Table of Contents
