Sony BVME170A Operation Manual page 19

The OVER RANGE lamp may indicate an error or
warning. For details, see "Error/warning display by the
lamp" (page 19).
d ECO lamp
The color of the lamp changes according to the power
consumption status of the monitor. The color changes from
green to yellow to magenta in order of greater power
consumption. Decreasing the luminance of the screen by
adjusting brightness/contrast is recommended when the
lamp lights in yellow or magenta.
The lamp starts flashing rapidly approximately one minute
before the screen saver is activated. Flashing slows in
green when the screen saver starts.
The ECO lamp may indicate an error or warning. For
details, see "Error/warning display by the lamp"
(page 19).
Error/warning display by the lamp
The OVER RANGE lamp, OPERATE lamp and/or ECO
lamp on the front panel may show an error or warning
while the monitor is being operated.
If the error or warning is shown, please contact your Sony
representative.
Error display
ECO OVER OPERATE
lamp RANGE lamp
lamp
Lights in Lights in Flashes in
yellow amber red
Lights in Flashes in Flashes in
yellow amber red
Flashes in Lights in Flashes in
yellow amber red
Lights in Flashes in Flashes in
magenta amber red
Flashes in Lights in Flashes in
magenta amber red
Warning display
ECO OVER OPERATE
lamp RANGE lamp
lamp
Flashes in
amber
–
Lights in
–
amber
–: Status except for error display.
Symptoms
The power in the
panel part is unusual.
The temperature in
the panel part is
unusual.
The ambient
temperature sensor is
unusual.
Fan error.
Device error.
Symptoms
The luminance is
reduced to protect the
panel from an
–
increase of
temperature in the
panel part.
Over range
–
Location and Function of Parts (BVM-E170A)
19