Sony BVME170A Operation Manual page 53

Menu
Color Temp Adj
Manual
Manual Adjust
Function and operation ([
Adjusts the color temperature.
When the item is selected, the color temperature data to be adjusted is displayed.
Except for the XYZ format signal
When D93, D65, D61, D55 or D-Cine data is changed, they are displayed as D93*, D65*,
D61*, D55* or D-Cine*.
To change the color temperature data to be adjusted, select D93, D65, D61, D55, D-Cine,
User1, User2, User3, User4 or User5 in the Color Temp menu of the Channel Configuration
menu.
For the XYZ format signal
When D-Cine XYZ data is changed, it is displayed as D-Cine XYZ*.
To change the color temperature data to be adjusted, select D-Cine XYZ, User XYZ1, User
XYZ2, User XYZ3, User XYZ4 or User XYZ5 in the Color Temp menu (page 60) of the
Channel Configuration menu.
Note
If you measure the color temperatures of different display types, such as CRT, LCD, or OLED,
by using a common (or general) color analyzer that is based on CIE 1931, and adjust the xy
chromaticity to the same value, the appearance may be different because of optical spectrum
differences.
To compensate for this difference, the D93, D65, D61, D55 and User1 to User5 settings
(except D-Cine) of the monitor are adjusted by an offset*.
* The offset value applied (x-0.006, y-0.011) is based on the Judd's function to the CIE 1931 (x, y) value.
Adjusts the color temperature manually.
When the item is selected, the color temperature data to be set is displayed.
Except for the XYZ format signal
When D93, D65, D61, D55 or D-Cine data is changed, they are displayed as D93*, D65*,
D61*, D55* or D-Cine*.
For the XYZ format signal
When D-Cine XYZ data is changed, it is displayed as D-Cine XYZ*.
When Contrast/Bright Hold is set to Off, the color temperature data are displayed. The
contrast data is displayed as the picture preset data Preset1 to Preset5 or Preset (D-Cine) set
in the Picture Preset menu of the Channel Configuration menu. To change the type of the
picture preset data, select from Preset1 to Preset5 or Preset (D-Cine) in the Picture Preset
menu (page 61) of the Channel Configuration menu.
Adjusts the color temperature using the BRIGHT, CHROMA, PHASE and/or CONTRAST
knobs.
When the item is selected, the color temperature adjustment display appears, and the Red,
Green and/or Blue color temperature data to be adjusted are displayed to allow gain or bias
adjustment. Select gain or bias adjustment, using the UP/DOWN buttons.
The adjustable items and relevant knobs are as follows:
To adjust Red (red): BRIGHT knob
To adjust Green (green): CHROMA knob
To adjust Blue (blue): PHASE knob
To adjust brightness (Red, Green and Blue together): CONTRAST knob
]: factory setting)
53
Adjustment Menu