Responding To Alarm Conditions; Responding To General Problems - Oki ML1120 User Manual

R
ESPONDING TO ALARM CONDITIONS
Use the following table for guidance on how to respond to
indicated alarm conditions.
INDICATOR
SEL
OFF
OFF
OFF
Flashing
Flashing
R
ESPONDING TO GENERAL PROBLEMS
Use the following table to help you to identify symptoms with
possible causes and take suggested remedial actions.
PROBLEM
No power
No power
ML1120/ML1190 User's Guide – Troubleshooting > 62
ALARM MEANINGS AND ACTIONS
ALARM
ON Paper has run out. Add paper and press the SEL
button.
Flashing The Paper Type lever is wrongly set for the type of
paper in use. Press the SEL button and set the
Paper Type lever to the correct position.
Flashing Problem with cut sheet feeding. Remove the cut
sheet.
ON Print data is received but printing does not start
because no paper is being fed. Insert paper.
OFF Printing cannot be resumed at this stage. Turn the
power OFF, verify that the carriage moves properly,
then turn the power ON again.
If the problem is still there after you turn the
power ON again, contact your dealer.
CAUSE
The power cable is not
properly connected.
Power outlet problem or
power outage.
ACTION
Check the power cable
is properly connected at
both power outlet and
printer.
Plug another appliance
into this outlet to check
if it works.