When the paper is positioned at the required TOF, release
the buttons in Step 5 above.
To save this position as the TOF, press and hold down the
LOAD/EJECT and the LF/FF buttons together for 3 seconds.
NOTE
Do not turn the Platen Knob or switch off the printer during
the above procedure.
P
RINTER STYLE
The impact mode settings available are Normal, Quiet and Quick
(ML1120 only) and the required mode can be set by using the
Set-up>Printer Style menu. When switched ON, the printer
enters the impact mode selected in this menu.
NOTE
In the ML1120, you can cycle through the Normal, Quiet and
Quick settings by ensuring that the SEL indicator is
illuminated before holding down the SEL button and then
pressing the TEAR button repeatedly as required.
ML1120/ML1190 User's Guide – Operating instructions > 57
(
IMPACT MODE
)
SETTINGS