Buttons - Oki ML1120 User Manual

B
UTTONS
BUTTON
SEL
LF/FF
LOAD/EJECT
TEAR
SEL+POWER ON
Switch
LOAD/EJECT+SEL
LOAD/EJECT+LF/
FF
ML1120/ML1190 User's Guide – Operating instructions > 44
STATUS
On-line
Off-line
On-line
Off-line
On-line and off-line
Continuous Forms mode
On-line and off-line
Cut sheet manual mode
On-line
Continuous Forms mode
On-line
Cut sheet manual mode
Off-line
On-line and off-line
On-line and off-line
FUNCTION
Sets the printer to off-line.
Sets the printer to on-line
and disalarms the printer.
Feeds paper by one line.
Holding the button down
results in continuous line
feeding.
Performs continuous line
feeding.
Ejects the cut sheet.
Continuous form fed until
first line of next page
If the continuous form is in
position, press to retract the
form to the Pin Tractors.
(If the sprocket holes of the
last page of the form
disengage from the sprocket
pins, do not attempt to eject
the paper as a paper jam
may result.)
Ejects the cut sheet
Delivers the continuous
form to the cut position. If
the button is pressed again
or data is received, the
original form position is
restored.
Ineffective
Ineffective
Enters menu mode.
Microfeed down 0.366 mm
(1/144 in) step.
Microfeed up 0.366 mm (1/
144 in) step.