Oki ML1120 User Manual page 66

PROBLEM
Broken and uneven
vertical lines.
Too large or small line
spacing.
Split print
Blanks appear in
graphic printout.
Blanks or deformed
characters appear in
double height type or
other extended types.
Improper cut sheet feed
No paper feed.
The platen rotates
without paper feed, or
continuous forms
instead of cut sheets
are fed.
Paper distortion.
Unable to eject.
ML1120/ML1190 User's Guide – Troubleshooting > 66
CAUSE
This may happen in
bidirectional printing.
Line spacing is not
selected correctly.
This is a paper feed
error, which is especially
notable in printing
regular characters.
This is a paper feed
error due to line feeding
in printing a single
character.
Sheets are located off
the paper guide.
Sheets are not loaded
to the end.
Sheets are not loaded
to the end.
The printer is in the
continuous forms mode.
Sheets are not loaded
to the end, or they are
not inserted straight.
Paper with wrinkles,
folds or other defects.
Paper not specified for
the printer.
The LF/FF button is
pressed.
ACTION
Use Print Registration in
the adjustment mode to
adjust.
Reselect line spacing
correctly in the
application.
This is not a failure.
This is not a failure.
Use the printer's built-in
fonts when you print
important documents or
bills.
Load sheets with their
left edges against the
paper guide.
Load sheets to the end.
Load sheets to the end.
Eject the continuous
forms and select cut
sheet mode for the
printer.
Load sheets to the end.
Change paper.
Use paper types
specified for the printer.
Press the LOAD/EJECT
button.