Oki ML1120 User Manual page 53

MENU ITEM
Top feed Top feed wait
menu time
Page length
control
Cut sheet auto
eject Position
TOF
Adjustment
(Cut Sheet)
TOF (cut sheet
top of form)
Cut sheet LF
adjustment
ML1120/ML1190 User's Guide – Operating instructions > 53
FUNCTION
Select the waiting
time between
setting paper on the
tray and feeding it
while the printer is
waiting for paper to
be fed in cut-paper
manual feed mode.
Control the page
length of cut paper.
Select a printable
area at the bottom
of cut sheets of
paper in cut-paper
mode (the character
centre position).
Select an
adjustment value
for the reference
position in regard to
the TOF position of
cut-paper/
passbooks.
The position moves
to the rear of the
form by [+] and to
the top of the form
by [-] in 1/60 in
increments.
Select the reference
position for the TOF
position when
feeding cut-paper in
manual mode. (Up
to the mid-section
of characters in the
first line.)
Adjust a line feed
amount in cut-paper
mode.
SETTING
Invalid
500 ms
1 sec
2 sec
by MENU setting
by Actual page
length
6.35 mm (1/4 in)
12.70 mm(6/12 in)
14.82 mm (7/12 in)
-20 – -1
0
+20 – +1
2.12 mm (1/12 in)
4.23 mm (1/6 in)
6.35 mm (1/4 in)
8.47 mm (1/3 in)
10.58 mm (5/12 in)
12.7 mm (1/2 in)
14.82 mm (7/12 in)
16.93 mm (2/3 in)
19.05 mm (3/4 in)
21.17 mm (5/6 in)
23.28 mm (11/12
in) 25.4 mm (1 in)
27.52 mm
(13/12 in)
Use top of form
-14 – -1
0
+14 – +1