Responding to Alarm Conditions
Use the following table for guidance on how to
respond to alarm conditions.
INDICATOR
SEL
ALARM
OFF
ON
Paper has run out. Add paper and
press the
OFF
Flashing
The Paper Type lever is set
incorrectly for the type of paper in
use. Press the
the Paper Type lever to the correct
setting.
OFF
Flashing
Problem with cut sheet feeding.
Remove the cut sheet.
Flashing ON
Print data is received but printing
does not start because no paper is
being fed. Insert paper.
Flashing Flashing
Printing cannot be resumed at this
stage. Turn the power OFF, verify
that the carriage moves properly,
then turn the power ON again.
If the indicator lights continue to
flash, contact your dealer.
ALARM MEANINGS AND ACTIONS
SEL
key.
SEL
key and move
ML620/ML621 User's Guide
1