Installation & Usage; Power Connection - Oki LD630D User Manual

3. Installation & Usage
※ CAUTION
- Be careful not to get your fingers pinched when opening or closing the paper cover.
Make sure to open the paper cover all the way until it locks into the open position.
- When loading roll paper, be careful not to get your fingers pinched between the paper roll
and the paper holder.
- Do not touch the cutter with your hands or do not put something into the cutter. Doing so
could result in an injury.

3-1 Power Connection

Connect power to the printer as shown below.
OFF
Power Switch
1) Turn off the printer power switch.
2) Check to see that the AC adapter voltage matches that of the power source.
3) Connect the AC adapter jack to the printer power connector.
4) Connect the power cord to the AC adapter.
5) Connect the power cord to a power source/outlet.
Rev. 1.0
AC Adapter
- 12 -
LD630D/LD640D
Power Cord