Dye sublimation (optional)
Dye sublimation printing is an optional upgrade which
allows continuous tone (i.e. no dots) printing at 600 dpi
resolution. Special dye sublimation media and ink car-
tridges are required. This mode of printing offers the ul-
timate in printing quality for the DP-5000 printer.
Printing metallic foil and white
Selecting the following colours in your application and
checking Use Spot Colour in the printer driver, allows
you to print gold and silver metallic foil, as well as nor-
mal colours. A white spot colour ink cartridge is also
available for printing on coloured paper or overhead
transparencies.
Note:
Foil and white spot ink cartridges cannot be
used on VPhoto media.
RGB settings (n100%)
Spot/Foil
Colours
R
G
White
90
90
Gold Foil
88
63
Silver Foil
74
76
Setup Guide
RGB settings (n255)
B
R
G
B
90
230
230
230
0
225
160
0
77
189
193
197
Overlay printing
Selecting Overlay in the printer driver leaves the paper
in the printer after printing is completed in order for you
to change cartridges and print additional colours on the
same page. By using Overlay, creative output can be
achieved either using a metallic foil as a base colour
and printing on top with conventional colours, or build-
ing up an image in a series of layers to create embossing
or other effects.
Options
•
USB interface kit for use and connection with
iMac or Windows 98 computers.
•
SCSI interface kit for connection with Macintosh
computers.
•
Dye sublimation upgrade for ultra high quality
printing using dye sublimation media and special
ink cartridges.
English
5