Oki DP-5000 Metallic and Colour Desktop Printer Setup Manual page 13

The printer automatically recognizes which type of car-
tridge is installed in each holder
Caution:
Move the carriage only at the points indicated by the large
arrows below. DO NOT push or move the the carriage by
its print head (1), spindles (2), or ribbon posts (3). These
components are easily damaged.
2
1
Install ink cartridges by following the steps below.
1. The cartridge has a stopper (1) to prevent slack in
the ribbon. Remove this stopper from the ink car-
tridge.
Setup Guide
3
1
2. Insert a pencil from the side marked "B" and turn
the pencil slowly to take up any slack in the rib-
bon.
3. Open the front cover, gently lower the cover with
your hand.
Caution:
The ink cartridges may be put in any holder but DO NOT
put ink cartridges directly into the carriage. Doing so may
result in damage to the printer.
English
9