Oki DP-5000 Metallic and Colour Desktop Printer Setup Manual page 14

4. Insert the left end of the ink cartridge with the let-
ter "B" and the manufacturer's logo facing
upward into the ink cartridge holder, while push-
ing the left side latch of the holder slightly to the
left along with the cartridge.
Note:
The printer carriage can select and pick up the
necessary ink cartridge from any holder. You
can place up to 7 cartridges of the same colour
in the holders to reduce the need to change ink
cartridges.
5. Push down the right side of the ink cartridge.
Make sure that the ink cartridge is securely
locked into the holder, and that there is no slack
in the ribbon.
10
6. Place a second ink cartridge on top of any ink
cartridge already installed. Gently push down on
the centre.
7. To remove an upper cartridge, grasp the cartridge
by the edges and gently push it towards its move-
able cartridge clip until the pedestal pops up and
the cartridge is released.
Oki DP-5000