Preparation; Removing Packaging - Oki DP-5000 Metallic and Colour Desktop Printer Setup Manual

Preparation

Caution:
Operating the printer without first removing the packing
materials may damage the printer.

Removing packaging

1. Lift the printer out of its container. Remove the
packing materials from the printer.
2. Remove the three pieces of tape (1) from the out-
side of the printer before using.
3. Open the front cover (1) by pushing the front
cover release button (2) to release the internal
6
1
1
lock. Gently lower the front cover with your
hand.
4. Remove the two pieces of carriage packing mate-
rial (1) from inside the printer.
2
Oki DP-5000