Printer Location; Computer Connection - Oki DP-5000 Metallic and Colour Desktop Printer Setup Manual

5. Press down on the release lever (2)
6. Remove the tape (3) from the metal frame, and
move the smaller packing piece (1) to the left
7. Remove the other tape (4) from the carriage
Caution:
Do not remove the white pad (1) or the cleaning pad (2) at
the left end of the platen (3). They are there to clean the
print head. Removing them can cause the printer to mal-
function. Do not touch the cover open sensor (4), which is
located on the left side of the printer.
4
2
Caution:
Always close the front cover carefully, never slam it shut.
If the cover is closed with too much force the ink cartridges
can become dislodged and damage to the printer may re-
sult.
Setup Guide
8. Carefully close the front cover after removing all
the carriage packing material.
Note:
Retain the packaging material to protect the
printer during transit if the printer has to be
moved. Please refer to the User Guide.

Printer location

After removing the packing material and reading the
safety precautions, choose a location which offers a sta-
ble, firm surface for your printer. Try to avoid places
which are subject to extremes of heat, cold, sunlight and
damp. Also, choose a location from which you can run
the power cables safely to suitable nearby connection
points.

Computer connection

1
3
Caution:
Power to the printer and computer must be turned off and
the power cables unplugged before connecting or discon-
necting the printer cable to prevent any damage or mal-
function from occurring.
English
7