Usage Guidelines; Loading Paper - Oki DP-5000 Metallic and Colour Desktop Printer Setup Manual

Usage guidelines

Caution:
Use dye sublimation ink cartridges only with dye sublima-
tion paper. Failure to do so can damage the printer and the
ink cartridge ribbon. Refer to the User Guide for more in-
formation.
Refer to the following table for guidelines on using the
different types of ink cartridges that are available.
Colours
Printing Mode
& Coatings
Cyan, Magenta, Standard
Yellow, Black VPhoto
VPhoto Primer Standard
VPhoto
Finish II Standard
VPhoto
Gold and Silver Standard
foil VPhoto
Econoblack Standard
White Standard
Setup Guide
Properties
Inks are resin based. Fade resistant,
waterproof and smudgeproof
Paper primer. Printing at 2400 dpi on
plain paper in VPhoto mode.
Glossy finish to prints. Software
selectable; glossy and matt finishes
on the final image.
Glossy foil, metallic text and graph-
ics on plain paper or other media
ideal for spot text, graphics or logos.
Low cost black and white text proof
printing at lower quality than stand-
ard black.
Applied in a similar way to foil col-
ours. Primer base for coloured
media or as a spot colour on OHT
film.
Colours
Printing Mode
& Coatings
Cyan, Magenta, Dye
Yellow, Black, Sublimation
Overcoat

Loading Paper

IMPORTANT:
DO NOT USE INK JET PAPER WITH THIS PRINTER.
Doing so will result in poor print qualilty and damage to
the printer. Ink jet paper is coated and is not compatable
with the DP-5000 printer.
Note:
When loading paper, use only one type of paper at a
time .
There are two modes of paper feeding; automatic and
manual. Use automatic feed mode for continuous print-
ing as follows:
English
Properties
For use only with dye sublimaton
upgrade kit. Dye sublimation inks
offer continuous tone photographic
quality results. Overcoat ink acts as
a protective cover for the other inks.
11