Cisco Wireless Service Module 2 Getting Started Manual page 85

Chapter 3 Configuring VSM
Figure 3-52
f.
Figure 3-53
OL-19733-01
To choose UDP multicast, click the UDP radio button, then in the
–
Multicast Address field enter the multicast address that camera should
use to multicast the video to VSMS
Transport Option
From the Bitrate drop-down list (see
video stream from the camera.
The Bitrate drop-down list appears only if you chose MPEG-2, MPEG-4, or
H.264 for the media type.
Bitrate Drop-Down List
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
Figure 3-53), choose the bit rate for the
Configuring VSM
3-33