Information Required For Configuring A Multi Services Platform - Cisco Wireless Service Module 2 Getting Started Manual

Planning for Your Installation

Information Required for Configuring a Multi Services Platform

Table 1-3 Information for Multi Services Platform Configuration
Description VSM components to run on this MSP.
Value
Component (check all that apply):
Description IP address for the Multi Services Platform.
Value IP address
Description Host name for the Multi Services Platform.
Value
Host name
Description
Subnet mask for the Multi Services Platform.
Value Subnet
mask
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
1-4
Table 1-2 Required Items
Item
Medium Phillips-head screwdriver.
Assistance from at least one other
person.
Table 1-3 lists the information that you need as you perform the initial
configuration of a Multi Services Platform. You may find it convenient to
determine and record this information before you begin the configuration
procedure. You can obtain this information from your network administrator.
When you configure an MSP, make a note which VSM components will run on it.
This information will help you assign the appropriate IP address or host name to
the MSP.
Description
Used to attach rack rails to the Multi
Services Platform chassis.
A Multi Services Platform is heavy.
VSMS VSVM
Chapter 1 Overview
VSOM
OL-19733-01