Cisco Wireless Service Module 2 Getting Started Manual page 68

Configuring VSM
Figure 3-20
If the video encoder allows access from VSMS only if VSMS provides valid
Step 6
authentication credentials, take these actions in the Authentication area in the
Details Tab:
a.
Figure 3-21
b.
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
3-16
Host IP/Name Field
In the Username field (see
provides when accessing the video encoder.
The user name is configured on the video encoder and the value that you enter
in this field must match the configured name exactly. The user name can
contain alphabetic and numeric characters only and is case sensitive.
Username Field
In the New Password field (see
provides when accessing the video encoder.
The password is configured on the video encoder and the value that you enter
in this field must match the configured password exactly. The password can
contain alphabetic and numeric characters only and is case sensitive.
Figure 3-21), enter the user name that VSMS
Figure 3-22), enter the password that VSMS
Chapter 3 Configuring VSM
OL-19733-01