Configuring VSM
Figure 3-36
f.
Figure 3-37
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
3-24
To choose Universal Datagram Protocol (UDP) unicast, click the UDP
–
radio button
To choose UDP multicast, click the UDP radio button, then in the
–
Multicast Address field enter the multicast address that the video encoder
should use to multicast the video to VSMS
Transport Option
If the Bitrate drop-down list appears (see
the video stream from the camera.
The Bitrate drop-down list appears only if you chose MPEG-2, MPEG-4, or
H.264 for the media type.
Bitrate Drop-Down List
Chapter 3
Configuring VSM
Figure
3-37), choose the bit rate for
OL-19733-01