Cisco Wireless Service Module 2 Getting Started Manual page 42

Performing the Initial Configuration of the Multi Services Platform
In the Routing Configuration area, take these actions:
Step 6
a.
b.
In the Network Address Setup area, take these actions:
Step 7
a.
Figure 2-11
b.
c.
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
2-20
Chapter 2
In the Default Gateway field, enter the default gateway for the server, if
applicable in your network configuration.
Click OK.
The Network Address Setup area appears again.
Click the Hostname and Name Server button to display the Hostname and
Name Server Configuration area, as shown in
Hostname and Name Server Configuration Area
In the Hostname field, enter the host name for the server.
(Optional) In the Domain Name field, enter the domain name for the server.
If you are not using fully qualified domain names, leave the default domain
name ("site") in this field.
Setting Up and Configuring the Multi Services Platform
Figure 2-11.
OL-19733-01