Cisco Wireless Service Module 2 Getting Started Manual page 77

Chapter 3 Configuring VSM
g.
Figure 3-38
h.
OL-19733-01
If the Frame Rate drop-down list
second for the video stream from the camera.
The Frame Rate drop-down list appears only if you chose JPEG for the media
type.
Frame Rate Drop-Down List
Use the Quality slider (see
stream.
The slider displays a numerical value when you move it. Use these numbers
to help determine the setting that you want as follows:
For MPEG-2, MPEG-4, and H.264 media types, values of 1 through 49
–
designate the relative priority that frame rate has over compression.
Values 50 through 100 designate the relative priority that compression
has over frame rate.
For JPEG media type, values of 1 through 100 designate the relative
–
quality of the video stream. A higher value uses less compression and
provides higher quality, but consumes more bandwidth.
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
(seeFigure 3-38), choose the frame rate per
Figure 3-39) to specify the quality of the video
Configuring VSM
3-25