Cisco Wireless Service Module 2 Getting Started Manual page 62

Configuring VSM
Figure 3-12
g.
h.
If you will use VSVM, take the following actions to configure the server that will
Step 4
run VSVM:
a.
b.
c.
Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
3-10
Host IP/Name Field
Click the Submit button to add the server.
Repeat this Step 3 for each server on which you will run VSMS.
Click Servers under Devices in the left panel of the VSOM Operator page, as
shown in Figure 3-7 on page
The Servers area appears.
In the Servers area, click Add a New Server, as shown in
page 3-8.
In the Server Information area in the Details tab, choose Video Surveillance
Virtual Matrix (VSVM) from the Server Type drop-down list, as shown in
Figure 3-13.
3-7.
Chapter 3 Configuring VSM
Figure 3-8 on
OL-19733-01